Gallery
Videos

Finance Options
DivideBuy
DivideBuy

3m Steel Pro Heavy Duty Folding Table

SKU: 08090
Quantity:
Est Delivery 20th November.
Total: £344.99

Earn 287 points

= £2.87 off your next order

 

The Heavy Duty 3m Folding Table for Professional Traders

Back by popular demand and rebuilt for 2026, the Steel Pro is the heavy duty trade table traders asked for. The frame, joints and fixings are welded steel throughout, so it stands up to the daily setup, knocks and heat of professional trade use. It folds out in seconds on the same concertina construction as our heavy duty gazebos, carries a removable steel top, and packs down into its own storage bag.

At 283cm wide, this 3m folding table fits neatly into a single 3m pop-up gazebo bay, giving you a ready-made gazebo table and counter for market stalls, street food pitches, catering and car boot sales.

  • Welded steel frame, joints and fixings
  • Removable powder coated steel counter top
  • Four working heights from 800mm to 1100mm
  • Takes up to 100kg
  • Concertina fold, with storage bag included
  • Spare parts available
Steel Pro 3m heavy duty folding trade table counter

New for 2026: Welded Steel Throughout

The original trade table earned its following, and the most common request from the traders who used it was simple: make it tougher. The 2026 redesign does exactly that. Every joint and fixing is now welded steel. The polypropylene and ABS parts used on the original have gone, which removes the weak points that wore under repeated folding and gives you a table built for years of daily trade.

Built for Caterers, Street Food and Market Traders

Welded steel changes where this table can work. From a hot grill to a weekly boot sale, the Steel Pro is a stall table made for the places plastic-jointed tables struggle.

A Street Food Table That Handles the Heat

The steel joints hold up around the heat of a busy kitchen or grill, where plastic fixings can soften or warp over time. That makes it a sound choice for caterers and street food vendors working close to high temperatures, whether it is a serving counter at the front of the pitch or a prep surface behind it.

A Market Stall Table for Daily Setup

For market traders putting a stall up and down every day, the robust frame and quick concertina setup mean less hassle at the start of each shift. As a folding table for a market stall, it takes the punishment of constant transport and assembly, and the 283cm top gives you a long, level run for stock. It pairs naturally with our market stall gazebos.

A Car Boot Table That Packs Down Small

Regular car boot and boot sale sellers need a table that goes up fast and carries a full display. The Steel Pro packs into two pieces, a 14kg frame and a 23kg top, so it is easier to load than a single long table, and it opens out to a big folding table with room for everything you brought.

A Gazebo and Tent Table Counter

Set inside a 3m pop-up gazebo or tent, the Steel Pro turns the open front into a proper table counter for serving, taking payment and displaying stock. Four height settings let you match it to how you work, from a seated craft stall to a standing service counter.

Sized to Fit a 3m Gazebo Bay

Measuring 283cm wide by 70cm deep in use, the Steel Pro is a 3m long table sized to sit inside a standard 3m pop-up gazebo with a little room at each end. If you have been looking for a 3 metre folding table or a 10ft folding table to fill the front of a stall, this is the length that fits a 3m bay. At roughly 9ft 3in it is a large folding table with plenty of serving and display space, on a 3m concertina table frame that opens in seconds before the steel top goes on. For traders who have used a 3m trestle table, it gives the same length on a welded steel frame built for daily use.

Adjustable to Four Working Heights

The table adjusts to four heights, so you can set it for serving, prep, display or seated work.

Steel Pro 3m Folding Table Height SettingsThe four working heights of the Steel Pro 3m heavy duty folding table, measured from the ground to the top.
PositionHeight (ground to top)Suits
1800mmSeated work and low display
2900mmPrep and general display
31000mmServing and standing work
41100mmCounter height service

Specifications

Steel Pro 3m Heavy Duty Folding Table SpecificationsSize, construction, load and compatibility for the Steel Pro 3m heavy duty folding trade table.
SpecificationDetail
Size in use (approx.)(W) 283cm x (D) 70cm
FrameWelded steel
Joints and fixingsWelded steel
TabletopRemovable steel counter top
FinishPowder coated
Height settingsFour, from 800mm to 1100mm
Maximum load100kg
ConstructionConcertina fold, as used on Gala Tent heavy duty gazebos
CompatibilityFits a 3m pop-up gazebo bay
IncludedStorage bag
SparesSpare parts available

Packing Dimensions

Steel Pro 3m Folding Table Packing DimensionsPacked size and weight of the Steel Pro frame and top.
PartPacked sizeWeight
Frame77 x 49 x 19cm14kg
Top105 x 77 x 11.5cm23kg

Frequently Asked Questions

Are the joints plastic or steel?

Steel. The 2026 model uses welded steel joints and fixings throughout, replacing the polypropylene and ABS parts on the original table.

Is it suitable for caterers working with heat?

Yes. The welded steel construction holds up around the high temperatures of catering and street food work far better than plastic fixings, which can soften with prolonged heat.

Will it fit inside a 3m gazebo?

Yes. At 283cm wide it is designed to fit neatly into a single 3m pop-up gazebo bay.

How long is the table?

The Steel Pro measures 283cm wide by 70cm deep in use, which is roughly 9ft 3in long. It is sized as a 3m table, to fill the front of a 3m gazebo or market stall.

Can I adjust the height?

Yes. There are four height settings from 800mm to 1100mm, suiting serving, prep, display and seated tasks.

How much weight can it hold?

The maximum load capacity is 100kg.

What is the best table for a car boot sale?

Look for a table that sets up quickly, carries a full display and packs into the car. The Steel Pro opens in seconds on a concertina frame, gives you a 283cm steel top that takes up to 100kg, and packs into two pieces: a 14kg frame and a 23kg top.

Are spare parts available?

Yes. Spare parts are available, so a single worn component can be replaced on its own, which keeps a well-used table going for longer.




Good Afternoon, how can I assist you today?

Assistance
ExpandAssistance   Alexandria